Titanium CP
Grade 1
Grade 1 titanium offers the best ductility and formability of the four commercially pure grades, as well as excellent corrosion resistance in oxidising or moderately reducing environments, including chlorides. It has good toughness even at low temperatures and can be easily welded, machined and deformed at hot and cold temperature.
Key benefits
Corrosion resistance
Formability
Weldability
Normes
ASTM F67
ISO 5832-2
Available forms in stock
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/04/actu2.jpg)
- 0.4 mm to 100 mm
- approx. 3000 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/04/SEP6699-768x513.jpg)
- 0,4 mm to 60 mm
- Width 1000 to 2000 mm
- Length 1000 to 6000 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/iStock-186667565-min-768x512.jpg)
- 0,32 mm to 10 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/tube-185333-12622448.jpg)
- 3 to 50.8 mm
- 0.3 to 5 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/tube-185333-12622448.jpg)
- 3 to 50.8 mm
- 0.3 to 5 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/04/SEP6742-768x513.jpg)
- From 3 mm
- From 10 mm
- Up to 6000 mm
Normes
ASTM B348
ASME SB348
ASTM B265
Available forms in stock
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/04/actu2.jpg)
- 0.4 mm to 300 mm
- approx. 3000 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/04/SEP6698-768x513.jpg)
- 0,4 mm to 60 mm
- 1000 to 2000 mm
- 1000 to 6000 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/iStock-186667565-min-768x512.jpg)
- 2 mm to 10 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/tube-185333-12622448.jpg)
- 3 to 50,8 mm
- 0,3 to 5 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/tube-185333-12622448.jpg)
- 3 to 50,8 mm
- 0,3 to 5 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/04/SEP6740-768x513.jpg)
- from 3 mm
- from 10 mm
- up to 6000 mm
Available forms in stock
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/pcsforge.jpg)
- From 100 mm
- On demand
Normes
DIN 65039
LN 9297
ASTM B265
WL 3.7024.1
Available forms in stock
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/04/actu2.jpg)
- 0.4 mm to 300 mm
- approx. 3000 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/plaques-3-min-768x513.jpg)
- 0,4 mm to 60 mm
- 1000 to 2000 mm
- 1000 to 6000 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/iStock-186667565-min-768x512.jpg)
- 0,32 mm to 10 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/tube-185333-12622448.jpg)
- 3 to 50,8 mm
- 0,3 to 5 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/05/tube-185333-12622448.jpg)
- 3 to 50,8 mm
- 0,3 to 5 mm
![](https://www.aerometals-alloys.com/wp-content/uploads/2020/04/SEP6740-768x513.jpg)
- from 3 mm
- from 10 mm
- up to 6000 mm
Chemical composition
- 0% min
- 0,2% max
- 0% min
- 0,18% max
- 0% min
- 0,03% max
- 0% min
- 0,08% max
- 0% min
- 0,015% max
- 0% min
- 0,1% max
- 0% min
- 0,4% max
- —
- Balance